ENPRLC8CHXR1001
8-Channel Relay Controller XR1
8-Channel Relay Controller XR1 for multi-device automation across valves, pumps, panels, and utility equipment. Built for scheduled control, remote switching, and HPzenAi-connected monitoring in field and panel deployments.
Identify your product
Match ENPRLC8CHXR1001 to your product label before using these specifications. Ratings and features apply to this SKU, not every model in the family.
Before installation
- Check the product and supplied parts for damage.
- Confirm the ratings below against the label and supplied installation instructions.
- Use qualified personnel for electrical or pressurised-system installation. Isolate power and release pressure before work.
- Follow the supplied model-specific wiring and commissioning instructions. If these are missing or unclear, contact support before installation.
Specifications
Relay Information
| Parameter | Value |
|---|---|
| Number of Relays | 8 channels |
| Relay Type | Electromechanical relay |
| Contact Rating | 10A @ 250V AC / 10A @ 30V DC |
| Output Type | Normally Open / Normally Closed (configurable) |
Connectivity
| Parameter | Value |
|---|---|
| RS485 Interface | Supported |
| Wi-Fi | 2.4 GHz IEEE 802.11 b/g/n |
| Bluetooth | BLE 4.2 |
| SIM / Cellular | 4G LTE |
| RF | 433 MHz / 915 MHz |
Control Features
| Parameter | Value |
|---|---|
| Manual Override | Supported |
| Remote Control | Via HPzenAi App / Gateway |
| Scheduling | Supported |
| Scene Support | Supported |
| Auto Restart | Supported |
Electrical
| Parameter | Value |
|---|---|
| Power Source | DC 12V |
| Quiescent Current | < 150 mA |
| Relay Switching Voltage | Up to 250V AC / 30V DC |
| Isolation Type | Optocoupler isolated |
Physical
| Parameter | Value |
|---|---|
| Material | ABS Plastic |
| Color | Black |
| Weight | 0.35 kg |
| Dimensions | 12 × 8 × 4 cm |
| Enclosure | IP30 |
Package contents
- Controller Unit: Primary relay controller hardware for multi-channel switching and automation.
- Installation Guide: Setup reference for channel wiring, mounting, and controller commissioning.
Use cases
- Street Light Control: Supports timed and remote switching workflows for street lighting and outdoor illumination infrastructure.
- Home Lighting Control: Controls output switching for home and building lighting circuits, enabling scheduled on/off cycles and scene management.
- Irrigation Valve Control: Coordinates relay-based switching for irrigation valves and related field water-distribution automation.
- Pump Control: Supports pump switching workflows used in water transfer, refill logic, and utility distribution systems.
- Industrial Equipment: Fits industrial automation panels that require structured relay switching for controlled equipment operation.
- Smart Building: Integrates with building-management workflows for controlled output switching, monitoring, and energy automation.
Warranty
12-month limited warranty
- Manufacturing defects under standard use conditions
- Internal electronics and sensor faults verified by support
- Factory accessory issues reported within the covered service window
Service
- Remote diagnostics and guided troubleshooting from HPzenAi support
- Service request coordination for repair or replacement review
- Availability of spare parts during service life
Eligible direct orders can be reviewed for replacement support for verified transit damage or early manufacturing defects under the applicable policy.
Need help?
Provide your SKU and the symptoms when contacting support. Do not share passwords or recovery secrets.