Identify your product
Match ENPMOTMX1P001 to your product label before using these specifications. Ratings and features apply to this SKU, not every model in the family.
Before installation
- Check the product and supplied parts for damage.
- Confirm the ratings below against the label and supplied installation instructions.
- Use qualified personnel for electrical or pressurised-system installation. Isolate power and release pressure before work.
- Follow the supplied model-specific wiring and commissioning instructions. If these are missing or unclear, contact support before installation.
Specifications
Specifications
| Parameter | Value |
|---|
| Product Type | Smart Motor Control Panel |
|---|
| Phase Type | Single-Phase |
|---|
| Manual Override | Supported |
|---|
| Relay Output | Supported |
|---|
| Industrial Grade | Yes |
|---|
Electrical Specifications
| Parameter | Value |
|---|
| Input Voltage | 12V DC |
|---|
| Control Output | Relay Contact Output |
|---|
| Voltage Monitoring | Supported |
|---|
| Current Monitoring | Supported |
|---|
Current Transformer (CT) Specifications
| Parameter | Value |
|---|
| Current Range | 0 – 60A AC |
|---|
| Accuracy Class | Class 0.1 |
|---|
Relay Specifications
| Parameter | Value |
|---|
| Number of Relays | 2 |
|---|
| Relay Contact Rating | 45A @ 270VAC |
|---|
| Relay Type | High-Power Electromechanical Relay |
|---|
| Standard Configuration | 1A + 1C |
|---|
| Custom Configurations | 1A + 1A, 1A + 1C, 1C + 1C |
|---|
Motor Control & Protection
| Parameter | Value |
|---|
| Motor Start / Stop Control | Supported |
|---|
| Automatic Operation | Supported |
|---|
| Manual Operation | Supported |
|---|
| Dry Run Protection | Supported |
|---|
| Overload Protection | Supported |
|---|
| Under Voltage Protection | Supported |
|---|
| Over Voltage Protection | Supported |
|---|
| Fault Detection | Supported |
|---|
Communication & Integration
| Parameter | Value |
|---|
| Communication Interface | RS485 |
|---|
| Communication Protocol | Modbus RTU |
|---|
| HPzenAi Gateway | RS485 (Integrated or External Gateway) |
|---|
| Remote Control | Supported |
|---|
External Devices Required
| Parameter | Value |
|---|
| Gateway | HPzenAi Gateway |
|---|
| Power Supply Module | HPzenAi 12V Power Module |
|---|
Construction & Environmental
| Parameter | Value |
|---|
| Enclosure Material | ABS Plastic |
|---|
| Color | Black |
|---|
Product Information
| Parameter | Value |
|---|
| Product Category | Smart Single-Phase Motor Controller |
|---|
| Dimensions | 12 × 8 × 4 cm |
|---|
| Weight | 1.2 kg |
|---|
Package contents
- Motor Controller Unit: Primary control hardware for motor automation and starter panel integration.
- Installation Guide: Panel setup reference for wiring, commissioning, and service checks.
Use cases
- Single-Phase Starter: Supports single-phase capacitor-start motor starter applications used in water pumping and small motor-control systems.
- Single-Phase Oil Starter: Works with single-phase oil-immersed starter panels used in pump control and field water-management installations.
Warranty
12-month limited warranty
- Manufacturing defects under standard use conditions
- Internal electronics and sensor faults verified by support
- Factory accessory issues reported within the covered service window
Service
- Remote diagnostics and guided troubleshooting from HPzenAi support
- Service request coordination for repair or replacement review
- Availability of spare parts during service life
Eligible direct orders can be reviewed for replacement support for verified transit damage or early manufacturing defects under the applicable policy.
Need help?
Provide your SKU and the symptoms when contacting support. Do not share passwords or recovery secrets.
All motor controllers guides