ENPLVSPRE2M001
Pressure Water Level Sensor - 2 m Stainless Steel
Submersible water level sensor with a 2 m measurement range and stainless-steel construction. Designed for tank, sump, and borewell level monitoring with dependable output for HPzenAi dashboards, alerts, and automation workflows.
Identify your product
Match ENPLVSPRE2M001 to your product label before using these specifications. Ratings and features apply to this SKU, not every model in the family.
Before installation
- Check the product and supplied parts for damage.
- Confirm the ratings below against the label and supplied installation instructions.
- Use qualified personnel for electrical or pressurised-system installation. Isolate power and release pressure before work.
- Follow the supplied model-specific wiring and commissioning instructions. If these are missing or unclear, contact support before installation.
Specifications
Specifications
| Parameter | Value |
|---|---|
| Sensor Type | Submersible Pressure Level Sensor |
| Measuring Principle | Hydrostatic Pressure Measurement |
| Measuring Range | 0 – 2 m Water Column |
| Operating Environment | Continuous Submersible Operation |
| Industrial Grade | Yes |
| Power Supply | 12V DC |
Measurement Performance
| Parameter | Value |
|---|---|
| Measuring Range | 0 – 2 m Water Column |
| Resolution | 0.1% FS |
| Accuracy | ±0.5% FS |
| Response Time | < 500 ms |
Communication & Integration
| Parameter | Value |
|---|---|
| Communication Interface | RS485 |
| Communication Protocol | Modbus RTU |
| Gateway Compatibility | HPzenAi Gateway Supported |
| Remote Monitoring | Supported |
Construction & Environmental
| Parameter | Value |
|---|---|
| Probe Material | 316L Stainless Steel |
| Housing Material | Stainless Steel |
| Protection Rating | IP68 (Fully Submersible) |
| Cable Length | 2 m |
| Cable Type | Shielded Waterproof Vented Cable |
| Corrosion Resistance | Supported |
Product Information
| Parameter | Value |
|---|---|
| Product Category | Submersible Water Level Sensor |
| Dimensions | 10 × 2 × 2 cm |
| Weight | 1.5 kg |
| Color | Silver |
Package contents
- Pressure Sensor Unit: Primary sensing element for field level detection and monitoring.
- Installation Guide: Setup reference for mounting, wiring, and basic commissioning checks.
Use cases
- Overhead Tank Monitoring: Tracks overhead tank levels for refill planning, overflow prevention, and pump automation workflows.
- Underground Storage: Provides dependable level measurement for underground sumps and stored water reservoirs.
- Residential Water Tanks: Supports domestic water-level visibility for tanks and storage points used in day-to-day residential supply.
- Agriculture Water Storage: Measures stored water levels in agriculture ponds, farm tanks, and irrigation reserve assets.
- Municipal Water Supply: Fits public water systems that require structured level visibility across distributed storage assets.
Warranty
12-month limited warranty
- Manufacturing defects under standard use conditions
- Internal electronics and sensor faults verified by support
- Factory accessory issues reported within the covered service window
Service
- Remote diagnostics and guided troubleshooting from HPzenAi support
- Service request coordination for repair or replacement review
- Availability of spare parts during service life
Eligible direct orders can be reviewed for replacement support for verified transit damage or early manufacturing defects under the applicable policy.
Need help?
Provide your SKU and the symptoms when contacting support. Do not share passwords or recovery secrets.